Effect of phosphogypsum on saline-alkalinity and aggregate stability of bauxite residue

A column experiment was conducted to investigate the effect of phosphogypsum (PG) on the saline- alkalinity, and aggregate stability of bauxite residue. Results showed that: with increasing leaching time, the concentrations of saline-alkali ions decreased while the concentration increased in bauxite residue leachate; compared with CK (control group) treatment, pH, electric conductivity (EC), exchangeable sodium percentage (ESP), sodium absorption ratio (SAR), and exchangeable Na⁺ content of bauxite residue were reduced following PG treatment; average particle sizes in aggregates following CK and PG treatments were determined to be 155 and 193 nm, respectively. SR-μCT test results also confirmed that bauxite residue following PG treatment acquired larger aggregates and larger pore diameter. These results indicate that the PG treatment could significantly modulate the saline-alkalinity, and simultaneously enhance aggregate stability of bauxite residue, which provides a facile approach to reclaim bauxite residue disposal areas.     

基于知识图谱和协同过滤的电影推荐算法研究

针对协同过滤算法在推荐电影过程中只能考虑电影外部评论而不能考虑电影内部的相似度关系,提出构建知识图谱辅助计算电影内部相似度。已有的电影数据可能是不完整的,因此采用知识图谱推理补全缺失的电影知识。基于TransE模型的知识图谱无法有效描述电影间的片名、演员、导演等复杂的多关系。首先采用改进的TransHR模型表示出电影信息之间的多关系,提升关系表示的准确率;然后通过用户评分矩阵计算电影间相似度;最后将2种相似度融合并应用于矩阵分解的推荐技术中。对比实验结果表明,该算法在召回率、准确率、平均绝对误差MAE等指标上都有所提升。     

无线电综合测试仪校准装置的研究及其不确定度分析

This calibration device of radio comprehensive tester is studied and established in this paper. It solves the verification and calibration of a large number of general-purpose radio comprehensive testers. The calibration device consists of four calibration sub- systems and calibration software system, including RF generator, audio generator, audio analyzer and RF analyzer. It also researches on the configuration of standard equipment and analyzes the uncertainty of the calibration devices, ensuring accurate and reliable val- ue transfer.     

单晶SiC的电助光催化抛光及去除机理

为满足电子半导体等领域对SiC超光滑、无损伤和材料高效去除的要求，提出了电助光催化抛光SiC的新方法。研究了光催化剂种类及其pH值对抛光液氧化性和抛光效果的影响，讨论了材料的去除机理。结果表明：以p25型TiO2为光催化剂配制抛光液所获得的最大氧化还原电位为633.11 mV，材料去除率为1.18 μm/h，表面粗糙度Ra=0.218 nm；抛光后SiC表面氧化产物中，Si-C-O、Si-O和Si4C4O4的含量明显增加，SiC表面被氧化并被机械去除是主要的材料去除方式。     

基于拓扑单向波导的电磁诱导透明效应研究

为了研究电磁诱导透明效应在拓扑单向波导中的表现，设计了一种基于磁性光子晶体的耦合谐振腔波导。通过对谐振腔位置的调控实现了具有单向性质的电磁诱导透明效应，并利用有限时域差分仿真证明了电磁诱导透明效应在单向拓扑波导中的相关特性。该研究可为拓扑波导中实现光延迟、光开关等提供参考。     

风速时间序列混沌判定方法比较研究

混沌识别是对非线性时间序列进行混沌预测的前提。针对时间序列风速确定性与随机性相结合的复杂非线性特征,研究了不同的混沌识别方法,并对风速时间序列进行混沌特征识别。应用随机噪声、周期运动及经典混沌系统的时间序列对所选方法进行可靠性验证。对美国国家风能研究中心M2测风塔实测时间序列风速数据进行非线性混沌特征识别。结果表明:风速时间序列具有明显的混沌特征;各风速时间序列表现出不同程度的混沌特征;各混沌识别方法对风速时间序列混沌特征的表达形式不同,互为补充,相互验证。